top of page

Loa: 2.36m (7’ - 9”)
Beam: 1.17m (3’ - 10”)
Draft: 0.127m (0’ - 5”)
Dry Weight: 45lb (20.5kg)


The "BREDE PRAM", a small, flat bottomed, rowing pram dinghy that can be used for fishing on the local inland water or perhaps as a tender to a larger boat. She is 7’ - 5" in length, 3’ - 11" wide and designed to be light enough to be carried by one person and transported on the roof rack of almost any car or on a small trailer. For power, an electric motor is best for the weight hanging on the transom.This is the basic kit with one seat across the middle. 

 

 Kit contents

Full Plywood Epoxy Kit -Contains 3 packs, everything you need to build the hull to a stage where you only need to add paint/ varnish.

Pack 1. Wood & Plywood pack. all the CNC cut plywood parts, planks, bottom plank, transom, trim, gunwales and inwales, ready for assembly.

Pack 2. Epoxy Materials Pack. All the epoxy materials required - resin, hardener, glue fillet additive, dispensing pumps, FG tape, gloves and mixing sticks.

Pack 3. Cable ties, clamps, rowlocks, and other sundry items.

 

Plywood Only Pack contents - All hull panels CNC cut with stitch holes drilled includingcentre frame and transom.

 

Packs are delivered as two or more packages.

 

This dinghy will take up to a 20lb thrust electric outboard with the battery box under the centre thwart. These lightweight dinghies are easily driven and do not require a lot of power to drive them. A 1hp petrol outboard is the maximum power size engine for this dinghy weighing between 9 and 12kg.

Fitting engines to small, lightweight dinghies does require, if solo, sitting further forward. With crew etc. weight will need to distributed.

 

Shipping to UK Only

Kit prices include delivery to UK Mainland Only -

Highlands & Islands and N.I. have a courier surcharge of at least £48 added.Please contact us for these areas or if you need any further information.​

Sorry, we cannot deliver outside UK.

Breade Pram 8 Standard Kit

£300.00Price
    bottom of page