top of page

Standard Canoe Kits

 10% Discount on all Kits for July 2024 

Standard Marine Plywood Kits

15 All pulled together and tight ready for epoxy stage.JPG
IMAG0231 (800x398).jpg
9.JPG
IMAG0203.jpg

See the Stitch & Tape boat building method building a canoe here.

All our kits are cnc cut and have our simple plank scarfing (joining) method except in the 2 piece canoes which are supplied with centre bulkheads.

This plywood is cheaper than our premier ply and so we are able to sell lower priced kits with it. 

All the kits that are suitable and those currently availabe for this plywood are listed below.

We like to discuss our kits with builders before you buy to make sure all your questions are answered.

The easiest way to contact us is by email - stanleysmallcraft@gmail.com. 

 

Full Kit Contents

Cut from marine plywood, you will receive all the hull panels with stitch holes drilled, wood for the trim (gunwales, inwales) and a yoke. Bulkheads and decks are included to form the bouyancy chambers with hatches and the holes cut for them.  Various other options could be incuded. 

Not all our designs suit this plywood.

See individual kits for full contents

Plywood Only Pack Contents

Cut from the same quality marine plywood you will receive all the hull panels.

This will include any bulkheads, decks or frames that are required for that design. 

The stitch holes are drilled.

Hatch holes will not be cut unless requested.

See individual kits for full contents

If you require anything not listed with the kits or an extra you want, please contact us.

 

Pay for your kit in 3 interest free instalments.

(Click Details and Options for amount)

Prices below do not include any current discounts or offers. Click Details & Options for current prices.

Lead times are currently 7 - 10 working days.

Free Delivery.

Contact us for further kit details.

Peasemarsh
Peasemarsh 10
Loa 10’ – 0” (3.05m)  Beam 2’ – 7” (0.79m)  Weight (apprx.) 40lbs (18kgs)  Max. Load (apprx.) 350lbs (159kgs)  Height at Bow/Stern 18"/18" (0.46m/0.46m)   Height amidships 11.5" (0.29m)   Crew 1 plus maybe a small 1

Another easy to build canoe which will take a solo adult paddler weighing up to 15st (95kg). It takes around 25hrs to build from the full kit and you can have the hull stitched together on the same day you receive it. There is an option to build it in two sections that bolt together.
Full Kit -  £595.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, yoke, deck supports and hatches.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack - £275.00
Contents - 
All hull half panels CNC cut with stitch holes drilled includes bulkheads and decks.


 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

15 All pulled together and tight ready f
PICT9293.JPG
4PM10-2P.jpg

A video of a Peasemarsh 10 being stitched together - speeded up, a bit.

All our Stitch & Tape canoes are assembled this way. Our dinghies too with a transom(s) stitched in instead of drawing the ends in.

Peasemarsh 12
Loa 12’ – 6” (3.81m)   Beam 2’ – 9” (0.84m)    Weight (apprx.)   45lbs (20kgs)    Max. Load (apprx.) 400lbs (181kgs)   Height at Bow/Stern  19"/19" (0.48m/0.48m)    Height amidships   12" (0.30m)    Crew    1 plus 1 light one
 
A great project for 2 adults to build and get out on the water after around 30hrs to build time from the full kit. Ideal for a day out on the water or a camping trip. It goes together easily with a simple plank joining method to get the length you need. There is an option to build it in two sections that bolt together as with the Peasemarsh 10.
Full Kit - £695.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, yoke, deck supports and hatches.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack - £325.00

Contents - All hull half panels CNC cut with stitch holes drilled includes bulkheads and decks.

 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

Peasemarsh12 W6.jpg
18 The hull is turned over and cleaned u
o.JPG
Peasemarsh 14
Loa 14’ – 6” (4.4m), Beam 2’ – 10” (0.86m), Weight (apprx.) 50lbs (22.5kgs),  Max. Load (apprx.) 580lbs (263kgs),  Height at Bow/Stern 21"/21" (0.53m/0.53m),  Height amidships 13" (0.33m),  Crew 2/3Adults.
 
A great project to get up to 3 adults paddling after around 40hrs build time from the full kit. Ideal for a day out on the water or a camping trip. As with the 12, it goes together easily with a simple plank joining method to get the length you need.
Full Kit - £795.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, yoke, deck supports and hatches.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack - £395.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks.

 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

SO1.jpg
The Swan near Stoke Gabriel M.O. Dartmou
Dengemarsh
Dengemarsh 10

Length 10' - 0" (3.048m)    Beam 2' - 9" (0.813m)    Depth (midships) 1' - 0" (0.305m)    Height fwd/aft 1' - 7" (0.483m) Dry Weight (approx.) 38bs (17kgs)    Crew 1 Adult or 2 Children  
 
The Dengemarsh canoe is based on the Peasemarsh but with an extra plank which makes for a slightly rounder hull. An open “Canadian” style canoe along the lines of the Peasemarsh design but with an additional plank each side. There is optional buoyancy fore and aft using the bulkheads  and enclosed with a flush fitting deck, both supplied. It goes together easily and quite quickly and once completed, looks good and gives good performance on the water. Designed to be paddled with 1 adult  or 2 children while kneeling but a seat(s) could be fitted.
Full Kit - £630
.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, yoke, deck supports and hatches.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack - £295.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks.

 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

IMAG0231 (800x398).jpg
PM10-1 (800x259).jpg
Dengemarsh 12
Length 12' - 6" (3.81m),  Beam 2' - 9" (0.84m), Depth (midships) 1' - 0.5" (0.32m),  Height fwd/aft 1' - 7.5" (0.49m),  Weight (approx.) 44lbs (20kgs),  Crew 2 Adults  #
 

Built-in buoyancy is supplied fore and aft using bulkheads and decks fitted with small hatches for storage of valuables etc. It takes between 30 and 40 hours to complete. This canoe is ideal for a solo paddle but will also take 2 adults and some gear for day trip or weekend camp etc. or perhaps a day on the water for the kids. It goes together easily and quite quickly. Once completed, it looks good and performs well on the water too. I love the lines of this canoe.
Full Kit - £715.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, yoke, deck supports and hatches.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack - £360.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks.


 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

DM12Christopher Munro.jpeg
2012-05-30 12.02.51.jpg

Dengemarsh 14 Open Canoe

Length 14' - 6" (4.42m),  Beam 3' - 0" (0.91m), Depth (midships) 1' - 2" (0.36m),  Height fwd/aft 1' - 9.5" (0.55m),  Weight (approx.) 52lbs (23.57kgs),  Crew 3 Adults, Maximum Load 600lbs (272kgs)
 
Built-in buoyancy fore and aft that can be fitted with small hatches for storage of valuables etc.
Built in 6mm plywood throughout and requires between 30 and 40 hours to complete.
This canoe is good for a solo paddle but will also take 3 adults and some gear for day trip or weekend camp etc. or perhaps a day on the water with the kids.
It goes together easily and quite quickly. Once completed, it looks good and performs well on the water too.
Designed to be paddled while kneeling but seats could be fitted.

Kit contents

Full Plywood Epoxy Kit - £815.00

Contains 3 packs, everything you need to build the hull to a stage where you only need to add paint/ varnish.

Pack 1. Wood & Plywood pack. all the CNC cut plywood parts, planks, bottom plank and decks, ready for assembly. Wood for trim and deck supports.

Pack 2. Epoxy Materials Pack. All the epoxy materials required - resin, glue fillet additive, FG tape, gloves and mixing sticks.

Pack 3. Cable ties, yoke, hatches and other sundry items.

 

Standard Plywood Only Option Pack - £420.00

Contains Plywood Hull Panels CNC cut with stitch holes. (Confirmation after order)

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

 

3CEB37BC-855C-4F42-9CCE-10F773DDF6A2.jpeg
83E8E045-EBC7-4900-B275-6A32E8AC5DA2.jpeg
New Bay

New Bay 11 Open Canoe
 

Loa 10’ – 10” (3.332m), Beam 2’ – 6” (0.8109m), Weight (apprx.) 40lbs (18kgs), Max. Load (apprx.) 350lbs (159kgs), Height at Bow/Stern 17"/17" (0.432m/0.432m),  Height amidships 12 1/4" (0.311m), Crew 1 adult or two children

Designed for me to go canoeing with my eldest two in their Peasemarsh 10's. Although I could have used my old Peasemarsh 16 that would normally carry me, my wife and the two youngest, I wanted something different just for me so, I designed the New Bay 11 having liked the performance of the 15 previously during trials. The 11 did not disappoint. It was easy to build and performed as I wanted. This is actually my favourite canoe.

Kit contents

Full Plywood Epoxy Kit - £610.00

Contains 3 packs, everything you need to build the hull to a stage where you only need to add paint/ varnish.

Pack 1. Wood & Plywood pack. all the CNC cut plywood parts, planks, bottom plank and decks, ready for assembly. Wood for trim and deck supports.

Pack 2. Epoxy Materials Pack. All the epoxy materials required - resin, glue fillet additive, FG tape, gloves and mixing sticks.

Pack 3. Cable ties, yoke, hatches and other sundry items.

 

Plywood Only Option Pack - £295.00

ContainsPlywood Hull Panels CNC cut with stitch holes. (Confirmation after order)

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

20856.JPG
7a.JPG

New Bay 13 Open Canoe

LOA 13 - 4” (4.064m), Beam 2’ - 10” (.864m), Height fwd/aft 1’ - 7” (0.483m), Height Amidships 1’- 1” (0.330m), Approx. Dry Weight 40lbs (19kgs), Crew 1 or 2 Adults


Designed for customer who wanted a smaller version of the New Bay 15. Following the ilnes of the New Bay 11 and increasing the overall size it turned out to be a great canoe and was produced as a kit and complete build. It was popular as DIY plans too.

Kit contents

Full Plywood Epoxy Kit - £775.00

Contains 3 packs, everything you need to build the hull to a stage where you only need to add paint/ varnish.

Pack 1. Wood & Plywood pack. all the CNC cut plywood parts, planks, bottom plank and decks, ready for assembly. Wood for trim and deck supports.

Pack 2. Epoxy Materials Pack. All the epoxy materials required - resin, glue fillet additive, FG tape, gloves and mixing sticks.

Pack 3. Cable ties, yoke, hatches and other sundry items.

 

Plywood Only Option Pack - £375.00

ContainsPlywood Hull Panels CNC cut with stitch holes. (Confirmation after order)

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

20180315_080512.jpg
20855.JPG
Burmarsh

Burmarsh 13 Open Canoe

Length 13' - 4" (4.064m), Beam 3' - 0" (0.91m),  Depth (midships) 1' - 1" (0.33m),  Height fwd/aft 1' - 7.5" (0.49m),  Weight (approx.) 44lbs (20kgs),  Crew 2/3 Adult (Plus gear)
 
A simple open canoe designed for a for a solo paddle but also able to take 2 adults and some gear for day trip or weekend camp etc. or perhaps a day on the water with the kids. In the past 3 years it has been converted to sail by several builders. They have been creative from adding simple out riggers and sailboard sails to adding more complicated rigs.
The kit is supplied in 5mm or 6mm plywood and will take 30 to 35 hours to complete.
It goes together easily and quite quickly. Once completed, it looks good and performs well on the water too. Has built in buoyancy fore and aft that can be fitted with drain plugs or small hatches to enable storage of valuables etc.
Designed with seating positions at the centre plus fore and aft.

 

Kit contents

Full Plywood Epoxy Kit - £795.00

Contains 3 packs, everything you need to build the hull to a stage where you only need to add paint/ varnish.

Pack 1. Wood & Plywood pack. all the CNC cut plywood parts, planks, bottom plank and decks, ready for assembly. Wood for trim and deck supports.

Pack 2. Epoxy Materials Pack. All the epoxy materials required - resin, glue fillet additive, FG tape, gloves and mixing sticks.

Pack 3. Cable ties, yoke, hatches and other sundry items.

 

Standard Plywood Only Option Pack - £395.00

Contains Plywood Hull Panels CNC cut with stitch holes. (Confirmation after order)

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

IMAG0209.jpg
IMAG0207.jpg
image1.jpeg
Shipping to UK Only
Free Delivery
to UK Mainland Only

Highlands & Islands add further £48.00


Please contact us for these areas or if you need any further information.





 
  • Facebook Social Icon
  • YouTube Social  Icon
  • Pinterest Social Icon
Build times are an estimate based on feedback and relate to the hull build up to preparation to paint stage.
A build could take a little less time or possibly more.
bottom of page