top of page

Premier Canoe Kits
 

See the Stitch & Tape boat building method building a canoe here.

All our kits are cnc cut and have our simple plank scarfing (joining) method except in the 2 piece canoes which are supplied with centre bulkheads.

The plywood used for these kits is a high quality Gaboon or Okoume BS1088, Lloyds registered marine plywood. 

All the kits that are currently availabe are listed below.

We like to discuss our kits with builders before you buy to make sure all your questions are answered.

The easiest way to contact us is by email - stanleysmallcraft@gmail.com.

Full Kit Contents

Cut from a high quality Gaboon (Okoume) or  Robbins Elite plywood guaranteed for 15 years, you will receive all the hull panels with stitch holes drilled, wood for the trim (gunwales, inwales) and a yoke. Bulkheads and decks are included to form the bouyancy chambers with hatches and the holes cut for them.  Various other options could be incuded. 

See individual kits for full contents

Plywood Only Pack Contents

Cut from the same high quality plywood you will receive all the hull panels.

This will include any bulkheads, decks or frames that are required for that design. 

The stitch holes are drilled.

Hatch holes will not be cut unless requested.

See individual kits for full contents

If you require anything not listed with the kits or an extra you want, please contact us.

 

Pay for your kit in 3 interest free instalments.

(Click Details and Options for amount)

Prices below do not include any current discounts or offers. Click Details & Options for current prices.

Lead times are currently 7 - 10 workng days.

Shipping to UK Only

 

Kits are delivered as two or more packages.

Kit prices include delivery to UK Mainland Only -

Highlands & Islands and N.I. have a courier surcharge of at least £48 added.

Please contact us for these areas or if you need any further information.​

Sorry, we cannot deliver outside UK.

Peasemarsh
Peasemarsh 8
The Peasemarsh 8 is an easy to build canoe 8'  at 7' - 7" (2.31m) long and 2' - 2" wide at it's widest point which will take a paddler weighing up to 11st (70kg). It takes around 20hrs to build from the full kit. What makes this an easy build is that the individual hull panels are supplied in one piece so you can have the hull stitched together and the first stage of the gluing done on the same day you receive it. Once on the water it's a great little fun canoe.
Full Kit Contents;
All hull panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, deck supports and drain plugs.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

This kit is only avalable as the Premier Full Kit - £59
5

 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only


 

Peasemarsh 10
Loa 10’ – 0” (3.05m)  Beam 2’ – 7” (0.79m)  Weight (apprx.) 40lbs (18kgs)  Max. Load (apprx.) 350lbs (159kgs)  Height at Bow/Stern 18"/18" (0.46m/0.46m)   Height amidships 11.5" (0.29m)   Crew 1 plus maybe a small 1

Another easy to build canoe which will take a solo adult paddler weighing up to 15st (95kg). It takes around 25hrs to build from the full kit and you can have the hull stitched together on the same day you receive it. There is an option to build it in two sections that bolt together.
Full Kit -  £895.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, yoke, deck supports and hatches.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack - £595
Contents - 
All hull half panels CNC cut with stitch holes drilled includes bulkheads and d
ecks.

 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

15 All pulled together and tight ready f
4PM10-2P.jpg
PICT9293.JPG

A video of a Peasemarsh 10 being stitched together - speeded up, a bit.

All our Stitch & Tape canoes can be assembled this way or the centre joint scarfed (edge glued and epoxy taped). Our dinghies too with a transom(s) stitched in instead of drawing the ends in.

Peasemarsh 12
Loa 12’ – 6” (3.81m)   Beam 2’ – 9” (0.84m)    Weight (apprx.)   45lbs (20kgs)    Max. Load (apprx.) 400lbs (181kgs)   Height at Bow/Stern  19"/19" (0.48m/0.48m)    Height amidships   12" (0.30m)    Crew    1 plus 1 light one
 
A great project for 2 adults to build and get out on the water after around 30hrs to build time from the full kit. Ideal for a day out on the water or a camping trip. It goes together easily with a simple plank joining method to get the length you need. There is an option to build it in two sections that bolt together as with the Peasemarsh 10.
Full Kit - £955.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, yoke, deck supports and hatches.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack - £655.00

Contents - All hull half panels CNC cut with stitch holes drilled includes bulkheads and decks.
 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

18 The hull is turned over and cleaned u
o.JPG
Peasemarsh12 W6.jpg
Peasemarsh 14
Loa 14’ – 6” (4.4m), Beam 2’ – 10” (0.86m), Weight (apprx.) 50lbs (22.5kgs),  Max. Load (apprx.) 580lbs (263kgs),  Height at Bow/Stern 21"/21" (0.53m/0.53m),  Height amidships 13" (0.33m),  Crew 2/3Adults.
 
A great project to get up to 3 adults paddling after around 40hrs build time from the full kit. Ideal for a day out on the water or a camping trip. As with the 12, it goes together easily with a simple plank joining method to get the length you need.
Full Kit - £1055.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks, wooden trim, yoke, deck supports and hatches.  Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack -£715.00
Contents - 
All hull half panels CNC cut with stitch holes drilled including bulkheads and decks.

 

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

 

SO1.jpg