Dengemarsh 14 Open Canoe
​
Length 14' - 6" (4.42m),  Beam 3' - 0" (0.91m), Depth (midships) 1' - 2" (0.36m),  Height fwd/aft 1' - 9.5" (0.55m),  Weight (approx.) 52lbs (23.57kgs),  Crew 3 Adults, Maximum Load 600lbs (272kgs)
 
Built-in buoyancy fore and aft that can be fitted with small hatches for storage of valuables etc.
Built in 6mm plywood throughout and requires between 30 and 40 hours to complete.
This canoe is good for a solo paddle but will also take 3 adults and some gear for day trip or weekend camp etc. or perhaps a day on the water with the kids.
It goes together easily and quite quickly. Once completed, it looks good and performs well on the water too.
Designed to be paddled while kneeling but seats could be fitted.
​
Dengemarsh 14 Plywood & Epoxy Kit -  £1050.00 Including delivery
​
Full Kit Contents - 
Contains 3 packs, everything you need to build the hull to a stage where the hull is ready for preparation for paint and varnish.
Pack 1. Wood & Plywood. The plank sections with stitch holes drilled ready for assembly and the wood for trim and deck supports.
Pack 2. Bottom plank panels with stitch holes drilled, bulkheads and decks, cable ties, yoke blank, drain plugs (holes drilled) and other sundry items including fibreglass tape, glue fillet additive, gloves and mixing sticks.
Pack 3. Epoxy Resin Pack. Resin, hardener, dispenser pumps.
​