top of page

Loa: 2.36m (7’ - 9”)
Beam: 1.17m (3’ - 10”)
Draft: 0.127m (0’ - 5”)
Dry Weight: 20.5kg (45lb)
We were asked to design a small dinghy which would take an Optimist rig after a client had his own hull badly damaged in an accident and was left with the rig, dagger board and rudder. They had their own ideas for a design shape and the hull shape had a “V” shaped hull bottom and turned out to be a nice little boat. This is a rowing, motor and sailing dinghy that will take an electric outboard or a small 2hp outboard motor. You could build the standard boat, fit rowlocks and oars, then add an engine and the sail rig later.
Basic Materials Required (for complete hull) 
2 x 6mm x 2.44m x 1.22m & ½ sheet 12mm Plywood (transoms) - 3kg Epoxy Pack – 2ltr fillet mix – 25m x 100mm FG Tape – 3m x 200mm x 12mm (min) – 18mm (max) Timber for seats, 6 x 2.4m x 12mm x 21mm for trim (min size), 100 x 4.8mm x 300mm cable ties.

Seranata Pram 8 - Digital Download Plans

£15.00 Regular Price
£13.50Sale Price
    bottom of page