top of page

Loa: 2.36m (7’ - 9”)
Beam: 1.17m (3’ - 10”)
Draft: 0.127m (0’ - 5”)
Dry Weight: 45lb (20.5kg)
These plans are for the "BREDE PRAM". A small, flat bottomed, rowing pram dinghy that can be used for fishing on the local inland water or perhaps as a tender to a larger boat. She is 7’ - 5" in length, 3’ - 11" wide and designed to be light enough to be carried by one person and transported on the roof rack of almost any car or on a small trailer. For power, an electric motor is best for the weight hanging on the transom. These plans are the basic plans to build the hull shell with one seat. 
Basic Materials Required (Rowing Version):
2 x 2.44m x 1.22m sheets of 6mm Plywood (preferably marine grade)
1 x 2.44m x 1.22m sheet of 12mm Plywood for transoms and seating etc. (preferably marine grade)
4 x 12mm x 30mm DIY timber or Douglas Fir etc.
3kg Epoxy Pack
2ltr Fillet Mix
30m x 100mm Wide Fibre Glass Tape
50 Cable Ties

Brede Pram 8 - Digital Download Plans

    bottom of page