Loa: 3.05m (10’ - 0”)
Beam: 1.37m (4’ - 6”)
Draft: 0.15m (0’ - 6”)
Dry Weight: 38.55kg (85lb)
Motor: Max 2hp
The "PEVENSEY 10" is 10' - 0" long and 4' - 6" at its widest point. She will only need 5" of water with an average load of 2 adults, a picnic or fishing gear and a small outboard motor. Her dry weight comes out at around 80lb (36kg) depending on how she is built. Her main use is as a fresh water fishing boat for use on lakes, canals and rivers etc. One was recently built as a picnic boat for use on a canal with canopy fitted too. She is built in 6mm ply with a 6 or 9mm bottom to keep weight down and has optional buoyancy built-fore and aft. A full length keel strip is fitted to the bottom along with simple timber outer runners to help protect it when beaching. She is easily driven by a small 2hp petrol outboard or an electric outboard can be fitted for motoring.
Although, on paper, it is possible for this boat to be carried on a roof rack of a larger car, she is more easily handled, launched and recovered by trailer.
PLEASE NOTE- Prices below are for the all 6mm plywood kits
Plywood Only Kit - £295.00 Contains all the plywood parts, planks, bottom panel, frame and transom, ready for assembly.Both Options come with the full instructions pack for the build.
Full Plywood Epoxy Kit - £565 Contains 3 packs, everything you need to build the hull to a stage where you only need to add paint/ varnish and a set of oars or a motor.
Pack 1. Wood & Plywood pack. Planks, bottom panel, frame and transom, ready for assembly. The wood for the seats and trim is also included.
Pack 2. Epoxy Materials Pack. All the epoxy materials required - resin, glue fillet additive, FG tape, gloves and mixing sticks.
Pack 3. Cable ties and other sundry items.
Shipping to UK Only
Kit prices include delivery to UK Mainland Only -
Highlands & Islands and N.I. have a courier surcharge of at least £48 added.Please contact us for these areas or if you need any further information.
Sorry, we cannot deliver outside UK.